Gaussmeter with Hall-effect probe — TESLA Basic model

A simple, classic gaussmeter that nonetheless offers all the essential functions for measuring a magnetic field.

Its Hall-effect probe can measure up to 20,000 Gauss (2 Tesla), while indicating the + or − polarity of the magnet.

Technical specifications:

Model name: TESLA Basic

Display type: Digital

Backlight: Yes

Maximum flux density: 20,000 Gauss (2 Tesla)

Available units of measurement: Gauss or Tesla.

Maximum value memory: Yes (Peak hold)

Zero reset: Yes (Reset)

Polarity indication: Yes, S or N sign displayed (South or North)

Measurement gauge: Yes, bar graph up to full capacity.

Probe technology: Hall effect

Probe type: Transverse (flat. Probe parallel to the surface)

Works on: Ferrite / Samarium-cobalt / Neodymium / Electromagnet / Any source of DC (0 Hz) magnetic field

Magnetometer operating temperature: -5 to +55°C

Probe operating temperature: -5 to +60°C

Accuracy: 2% up to 10,000 Gauss (5% from 10,000 to 20,000 Gauss)

Power supply: 9-volt battery (Supplied)

Battery level indicator: Yes, bar graph (as on a smartphone)

Battery life: Approx. 3,000 measurements.

Dimensions: 165x86x35

Weight: 270 g

Packaging: Cardboard box with foam inserts.

Warranty: 12 months for the gaussmeter (teslameter) and its Hall-effect probe, under normal conditions of use.

Ideal for use on magnetic plates, magnetic bar separators, sorting magnets, recycling overband magnets, lifting or clamping electromagnets and, more generally, any magnet or electromagnet that does not generate frequency or eddy currents.
If you would like the gaussmeter to come with a certificate of conformity, please remember to request it when ordering.

Tips:

:
- Remember that the air gap is the enemy of magnetic performance. Make sure to remove any impurities stuck to the probe's sensing element. Likewise, clean your magnetic equipment properly. For example, a 1 mm gap between a neodymium magnetic device and the probe sensor can mean a loss of 1,000 Gauss (0.1 T).
- The temperature of the magnet or electromagnet itself directly affects the maximum flux density Br it can deliver. Periodic readings taken on magnetic equipment must be made at the same temperature.
- The quality of a flux density measurement in contact with a magnet or magnetic system also depends on the person taking it. Patience is important to find the point where the flux density is strongest.
- Any work in an area where a magnetic field is emitted must be carried out by qualified personnel, in accordance with the regulations in force on protecting the health of workers exposed to magnetic fields.