This Hall effect probe connects to the TESLA-Basic gaussmeter. It is of the radial type, and allows the measurement of a magnetic field.
This Hall effect probe is capable of measuring up to 20,000 Gauss (2 Tesla), and works on both permanent magnets and electromagnets.
Technical characteristics:
Model Name: TESLA Basic Radial Probe
Connection to the gaussmeter: knurled nut to screw.
Number of pins: 5 in star
Maximum induction: 20000 Gauss ( 2 Tesla)
Admissible magnetic field: continuous - 0 Hz
Probe technology: Hall effect
Probe type: Radial (flat. Probe parallel to surface)
Probe operating temperature: -5 to +60°C
Works on: Ferrite / Samarium-cobalt / Neodymium / Electromagnet / Any DC (0Hz) magnetic field source
Size: 180mm Diameter 18mm
- Cable length: 1 meter
Weight: 55g
Packaging Type: Cardboard Envelope
Warranty: 36 months under normal conditions of use.
Ideal for use on magnetic plates, bar separators, sorting magnets, recycling overbands, lifting or clamping electromagnets, and in general any magnet or electromagnet that does not generate frequency or eddy currents.
If you would like the Hall effect probe to be accompanied by a certificate of conformity, remember to request it when ordering.
Tips:
- Remember that the air gap is the enemy of magnetic performance. Remember to remove any impurities stuck to the inductive sensor of the probe. Similarly, properly clean your magnetic equipment. For example, a clearance of 1 mm between a neodymium magnetic device and the sensor of the probe, can represent a loss of 1000 Gauss (0.1 T).
- The temperature specific to the magnet or the electromagnet directly influences the maximum induction Br that it is capable of supplying. The periodic readings carried out on a magnetic material must be made for an identical temperature.
- The quality of the measurement of induction in contact with a magnet or magnetic system also depends on the person performing the measurement. Patience is important to find the point where the induction is strongest.
- Any intervention in a magnetic field emission environment must be carried out by qualified personnel, and in accordance with the regulations in force on the protection of the health of workers subjected to magnetic fields.